Download fulltext HTML
Yarullin, M. G., & Khabibullin, F. F. (2018). Kinematics of a Two Movable Disintegrator with Drives Based on the Bennett’s Mechanism. KnE Engineering, 3(5), 122–131. https://doi.org/10.18502/keg.v3i4.2234

https://doi.org/10.18502/keg.v3i4.2234

statistics

  • 237 Abstract Views
  • 157 PDF Views
  • 0 HTML Views

authors

  • M G Yarullin
    No author data available.
  • F F Khabibullin
    No author data available.

Published Date

  • May 7, 2018

Kinematics of a Two Movable Disintegrator with Drives Based on the Bennett’s Mechanism

KnE Engineering / Russian Forum of Young Scientists (RFYS) / Pages 122–131

Abstract

Important factor in the crushing and activation of building materials is the linear velocity of the working organs of the disintegrator. This paper consider the nature of the change of this parameter, as well as the linear velocity of the working element characteristic points. Their values are determined by three independent methods: analytical calculation, CAD / CAE analysis and experimental measurements. The results are compared and analyzed.

References
[1] Bennett G T 1903 A new mechanism Engineering p.777-778.


[2] Alizade R I, Kiper G and Bagdadioglu B 2014 Function synthesis of Bennett 6R mechanisms using Chebyshev approximation Mech Mach Theory 81 p. 62–78.


[3] McCarthy J 2000 Geometric Design of Linkages Springer 320 p.


[4] Budniak Z and Bil T 2012 Simulation of the movement of four-bar spatial linkage Int. J. of Applied Mechanics and Engineering Vol. 17 p.723-732.


[5] Lee C C and Herve J M 2014 Oblique circular torus, Villarceau circles, and four types of Bennett linkages Part C J Mech Eng Sci. 228(4) p. 742-752.


[6] Lee C C and Herve J M 2015 The Metamorphic Bennett Linkages The 14th IFToMM World Congress,Taipei, Taiwan.


[7] Pat. 2581487 2016 Russian Federation, Disintegrator of uneven crushing Yarullin M G, Mingazov M R, Isyanov I R and Khabibullin F F publ. 04/20/2016 Byul. № 11-9 p.


[8] Evgrafov A N 2013 Calculation of geometric and kinematic parameters of the spatial lever mechanism with redundant coupling Problems of machine building and machine reliability No.3 p. 3-8.


[9] Herve J M 2009 Conjugation in the displacement group and mobility in mechanisms Transactions of the Canadian Society for Mechanical Engineering Vol. 33 p. 163–174.


[10] Yarullin M G, Mingazov M R and Galiullin I A 2016 Historical review of studies of spatial nR linkages International Review of Mechanical Engineering 10(5) p. 348-356.


[11] Herve J M and Dahan M 1983 The two kinds of Bennett’s mechanisms Sixth IFToMM World Congress on Theory of Machines and Mechanisms Vol.1 p. 116-119.


[12] Lee C C and Herve J M 2010 Generators of the product of two Schoenflies motion groups Euro. J. Mech A/Solids 29(1)p. 97–108.


[13] Yarullin M G, Khabibullin F F and Isyanov I R 2016 Nonlinear crushing dynamics in two degree of freedom disintegrator based on the Bennett’s linkage Vibroengineering procedia Vol. 8 p. 477- 482.


[14] Yarullin M G and Mingazov M R 2016 Structural modifications synthesis of Bennett mechanism Lecture Notes in Mechanical Engineering p. 9-16.


[15] Yarullin M G and Khabibullin F F 2017 Theoretical and Practical Conditions of Bennett Mechanism Workability Lecture Notes in Mechanical Engineering p. 145-153.


[16] Mudrov P G 1976 Spatial mechanisms with rotational pairs Publishing House of Kazan Universityp. 264.