New Binder Materials From Industrial Waste Of The Ural Region
Abstract
In the scientific article the results of development and research of technological and physico-mechanical characteristics of new type slag-alkaline binder on the basis of ground granulated blast furnace slag production company "Mechel-materials" and waste in ceramic production. A review of existing research on the subject. It is revealed that the increase in content and decrease in silicate module of liquid glass accelerates the processes of structure formation during solidification and slag cement increases the compressive strength and Flexural strength. Optimized the composition of the new type of binding agent. The proposed processing methods and established the validity of the beginning of industrial production of slag cement on the basis of wastes of the Ural region.
References
[1] S. A. Bernal, R. Mejía de Gutiérrez, A. L. Pedraza, J. L. Provis, E. D. Rodriguez, and S. Delvasto, “Effect of binder content on the performance of alkali-activated slag concretes,” Cement and Concrete Research, vol. 41, no. 1, pp. 1–8, 2011.
[2] M. Criado, A. Fernández-Jiménez, and A. Palomo, “Alkali activation of fly ash. Part III: Effect of curing conditions on reaction and its graphical description,” Fuel, vol. 89, no. 11, pp. 3185–3192, 2010.
[3] M. Gerstig and L. Wadsö, “A method based on isothermal calorimetry to quantify the influence of moisture on the hydration rate of young cement pastes,” Cement and Concrete Research, vol. 40, no. 6, pp. 867–874, 2010.
[4] M. Guerrieri and J. G. Sanjayan, “Behavior of combined fly ash/slag-based geopolymers when exposed to high temperatures,” Fire and Materials, vol. 34, no. 4, pp. 163–175, 2010.
[5] A. S. Noskov, V. S. Rudnov, and I. A. Devyatykh, “Energy-efficient technology for the production of slag as an alternative binder to the Portland cement, The Economic and technical aspects of safety of civil engineering critical infrastructures,” in Proceedings of the international conference, pp. 140–143, Ekaterinburg, 2015.
[6] D. Ravikumar, Property development, microstructure and performance of alkali activated fly ash and slag systems [Ph.D. thesis], Clarkson University, 2012.
[7] D. Ravikumar, S. Peethamparan, and N. Neithalath, “Structure and strength of NaOH activated concretes containing fly ash or GGBFS as the sole binder,” Cement and Concrete Composites, vol. 32, no. 6, pp. 399–410, 2010.
[8] I. Romanenko and F Patent, 2370465. (2009).
[9] L. I. Riabokon, S. V. Bednyagin, and I. K. Domanskaya, “Lightweight concretes of activated metakaolin-fly ash binders, with blast furnace slag aggregates,” Building materials, vol. 7, pp. 21–24, 2016.
[10] Z. G. Ponomarenko, A. L. Rechneva, F. L. Kapustin, I. D. Kashcheev, V. A. Perepelitsyn, and A. A. Ponomarenko, “Use of Spent Molding Sand in the Production of Refractories,” Refractories and Industrial Ceramics, vol. 57, no. 2, pp. 132–134, 2016.
[11] Q. Xu, J. Hu, J. M. Ruiz, K. Wang, and Z. Ge, “Isothermal calorimetry tests and modeling of cement hydration parameters,” Thermochimica Acta, vol. 499, no. 1-2, pp. 91–99, 2010.