Testing of the SERPENT 2 Software Package and Calculation of the VVR-ts Research Reactor Lifetime

Abstract

The possibility of calculating the non-standard geometry complex of the VVR-ts research reactor (a research water-water reactor for specific purposes) on the Serpent 2 software package is considered. Calculations of a real reactor lifetime conducted using the Serpent 2 software package are compared with calculations for the MCNP/VisualBurnOut and with the data from the archive.

References
[1] Kochnov O.Yu., Lukin N.D. VVR-ts - stages of reactor reconstruction. Abstracts of the report for the XI Russian Conference ”Safety of Research Nuclear Reactors”, Dimitrovgrad, May 25-30, Year: 2015, Page: 35-36.


[2] Kolesov VV, Kochnov O.Yu., Volkov Yu.V., Ukraintsev V.F., Fomin.R.V., Creation of a precision model of the VVR-ts reactor for the subsequent optimization of its design and the development of radionuclides. In the collection: ”Safety of Nuclear Power Plants and Training of Personnel-2011”, Obninsk, Year: 2011, Volume: 2, Page: 144-
146.


[3] Jaakko Leppänen, PSG2 / Serpent2 – a Continuous-energy Monte Carlo Reactor Physics Burnup Calculation Code. Methodology – User’s Manual – Validation Report:, 2012.


[4] Kolesov VV, Kamayev DA, Ukraintsev VF, Khitrik D.V., Using the method of interval calculations to obtain estimates of the errors in fuel characteristics during the campaign // Nuclear Power Engineering, Izv. Institutions of Higher Education, Year: 2007, Volume: 2, Page: 3-7.


[5] Kochnov O.Yu., Kolesov VV, Fomin R.V. Estimation of energy release in a target with a uranium-containing material in the production of 99Mo using targets of an improved design at the VVR-c reactor// Nuclear Power Engineering, Izv. Universities, Year: 2012, Volume: 4, Page: 23-28.


[6] Kochnov O.Yu., Kolesov VV, Fomin R.V., An estimate of the increase in production of 99Mo for various arrangements of the core at the VVR-c reactor // Nuclear Power Engineering, Izv. Universities, Year: 2013, Volume: 1, Page: 110-115.


[7] Kochnov O. Yu., Kolesov V. V., Fomin R. V., Improvement of the Neutron-Physical Characteristics of the VVR-Ts Reactor by Substituting a Beryllium Reflector for Some Fuel Assemblies in the Core // Atomic Energy, Year: 2015, Volume: 118, Issue: 4, Page: 238-241. DOI: 10.1007/s10512-015-9986-5


[8] Kochnov O.Yu., Kolesov V.V., Fomin R.V., Zherdev G.M., An estimate of the increase in production of 131I using tellurium targets of an improved design at the VVR-c reactor// Nuclear Power Engineering, Izv. Universities, Year: 2014, Volume: 4, Page: 102-110.


[9] Kochnov O. Yu., Kolesov V. V., Fomin R. V., Modernization of the VVR-TS reactor core for the increasing of the radionuclides production // Journal of Physics: Conference Series, Year: 2017, Volume: 781, Issue: 1. DOI: 10.1088/1742-6596/781/1/012031


[10] Karazhelevskaya Yu.E., Kolesov V.V., Modeling of the core of the research reactor VVR-ts on the software complex ”Serpent”. In the collection of abstracts: ”Nuclear Power Plants of Ultra-Low Power for Applied and Educational Purposes”, Obninsk, Year: 2016, Page: 22-24.