Download fulltext HTML
Loginov, Y., Babailov, N., & Pervukhina, D. (2017). The Action Result of the Concentrated Load on the Briquettes which Obtained from the Technogenous Material. KnE Materials Science, 2(2), 97-101. https://doi.org/10.18502/kms.v2i2.953

https://doi.org/10.18502/kms.v2i2.953

statistics

  • 272 Abstract Views
  • 171 PDF Views
  • 0 HTML Views

authors

  • Yu.N. Loginov
    No author data available.
  • N.А. Babailov
    No author data available.
  • D.N. Pervukhina
    No author data available.

Published Date

  • Sep 3, 2017

The Action Result of the Concentrated Load on the Briquettes which Obtained from the Technogenous Material

KnE Materials Science / Technogen-2017 / Pages 97-101

Abstract

In this study, the calculation results of the briquette stress state by the Finite element method are presented. The fields of compressive and tensile stresses in briquette are determined. The conditions affecting the process of the briquette destruction are considered.


Keywords: metallurgical briquette, finite element method, stress state

References
[1] I. F. Kurunov, “Environmental aspects of industrial technologies for recycling sludge and dust that contain iron and zinc,” Metallurgist, vol. 55, no. 9-10, pp. 634–639, 2012.


[2] I. L. Gonik, V. P. Lemyakin, and N. A. Novitskii, “Features of the use of briquetted iron-bearing wastes,” Metallurgist, vol. 55, no. 5-6, pp. 397–400, 2011.


[3] N. A. El-Hussiny and M. E. H. Shalabi, “A self-reduced intermediate product from iron and steel plants waste materials using a briquetting process,” Powder Technology, vol. 205, no. 1-3, pp. 217–223, 2011.


[4] P. Pustějovská, S. Brožová, and S. Jursová, “Possibilities of economic utilization of briquetted metallurgical waste,” in Proceedings of the 23rd International Conference on Metallurgy and Materials, METAL 2014, pp. 1841–1845, Czech Republic, May 2014.


[5] M. Wang, S. C. Wang, J. Y. Duan, and P. C. Zhang, “Study of the modeling and simulation for waste briquetting machine based on the compression/pushing mechanical hydraulic system,” Advanced Materials Research, vol. 912-914, pp. 790– 794, 2014.


[6] R. T. Dec and A. Zavaliangos, “Powder processing in the roller Press - Theory and practice,” Powder Handling and Processing, vol. 19, no. 1, pp. 23–28, 2007.


[7] Y. N. Loginov, S. P. Bourkine, and N. A. Babailov, “Cinematics and volume deformations during roll-press briquetting,” Journal of Materials Processing Technology, vol. 118, no. 1-3, pp. 151–157, 2001.


[8] Y. N. Loginov, N. A. Babailov, and S. P. Burkin, “Bulk deformation in roller briquetting of metallurgical waste,” Russian Metallurgy (Metally), no. 1, pp. 53–58, 2000.