Use of Regeneration Products of Moulding Mixtures For Construction and Refractory Materials Manufacturing
Abstract
Composition and regeneration properties of the molding sand mixtures worked out of casting production ‒ quartz sand and dust fraction. The results of the laboratory investigations as to their use in both building and refractory materials composition are presented. The industrial tests have shown the high efficiency of silica rich regenerated products in dinas products manufacture.
References
[1] M. K. Joseph, F. Banganayi, and D. Oyombo, “Moulding Sand Recycling and Reuse in Small Foundries,” Procedia Manufacturing, vol. 7, pp. 86–91, 2017.
[2] V. A. Pyachev, N. A. Mituschov, and S. V. Blinov, “Hydraulic activity of mold sands of casting production,” Cement and Its Application, vol. 2, pp. 89–92, 2007.
[3] S. P. Semenyuk and P. P. Semenyuk, “Worked out molding mixtures sands fine aggregates for concretes,” Concrete and Reinforced concrete. 7, pp. 29–30, 1992.
[4] R. Siddique, G. Singh, R. Belarbi, and K. A.-M. Kunal, “Comparative investigation on
the influence of spent foundry sand as partial replacement of fine aggregates on the properties of two grades of concrete,” Construction and Building Materials, vol. 83, article no. 6440, pp. 216–222, 2015.
[5] R. Siddique and A. Noumowe, “Utilization of spent foundry sand in controlled lowstrength materials and concrete,” Resources, Conservation and Recycling, vol. 53, no. 1-2, pp. 27–35, 2008.
[6] E. Furlani, G. Tonello, E. Aneggi, and S. Maschio, “Preparation and characterization of sintered ceramics made with spent foundry olivine sand and clay,” Ceramics International, vol. 38, no. 4, pp. 2619–2625, 2012.
[7] R. Alonso-Santurde, A. Andrés, J. R. Viguri et al., “Technological behaviour and recycling potential of spent foundry sands in clay bricks,” Journal of Environmental Management, vol. 92, no. 3, pp. 994–1002, 2011.
[8] Z. G. Ponomarenko, A. L. Rechneva, F. L. Kapustin, I. D. Kashcheev, V. A. Perepelitsyn, and A. A. Ponomarenko, “Use of Spent Molding Sand in the Production of Refractories,” Refractories and Industrial Ceramics, vol. 57, no. 2, pp. 132–134, 2016.