Recycling Option of the Wrong Length Copper Wire
Abstract
The purpose of the study is to study the possibility of utilizing copper waste from drawing. The experimental testing was carried out with reference to the compacting of segments of copper wire to produce products in the form of bars. The finite element method was used to evaluate the stress-strain state when the raw material compression scheme in the container was realized. It is shown that with the tested treatment modes a high level of strength properties is achieved, but an insufficient level of plastic characteristics.
Keywords: Recycling, copper wasters, stress, strain, program complex ABAQUS, finite element method, pressing, extrusion
References
[1] M. Zabłocka-Malicka, P. Rutkowski, and W. Szczepaniak, “Recovery of copper from PVC multiwire cable waste by steam gasification,” Waste Management, vol. 46, pp. 488–496, 2015.
[2] Y. N. Loginov, S. L. Demakov, A. G. Illarionov, M. A. Ivanova, and V. A. Romanov, “Structural condition of copper wire rod, obtained during the continuous casting - Rolling process,” Tsvetnye Metally, no. 8, pp. 87–92, 2013.
[3] Y. N. Loginov, A. G. Illarionov, S. Y. Klyueva, and M. A. Ivanova, “Deformations and structure of metal during cold butt-seam welding of copper blanks,” Russian Journal of Non-Ferrous Metals, vol. 53, no. 1, pp. 45–53, 2012.
[4] A. K. Jassim, “Using Sustainable Manufacturing Process to Produce Solid Shaft from Al - Zn Alloys Chips and Copper Chips without Melting,” in Proceedings of the 13th Global Conference on Sustainable Manufacturing, GCSM 2015, pp. 13–17, Binh Duong, Vietnam, September 2015.
[5] W. Z. Misiolek, M. Haase, N. Ben Khalifa, A. E. Tekkaya, and M. Kleiner, “High quality extrudates from aluminum chips by new billet compaction and deformation routes,” CIRP Annals - Manufacturing Technology, vol. 61, no. 1, pp. 239–242, 2012.
[6] B. Wan, W. Chen, J. Liu, S. Xu, and W. Li, “Technical progress in the recycling of aluminum and its alloys scrap chips,” Special Casting and Nonferrous Alloys, vol. 35, pp. 477–481, 2015.
[7] A. E. Tekkaya, M. Schikorra, D. Becker, D. Biermann, N. Hammer, and K. Pantke, “Hot profile extrusion of AA-6060 aluminum chips,” Journal of Materials Processing Technology, vol. 209, no. 7, pp. 3343–3350, 2009.
[8] S. N. Ab Rahim, M. A. Lajis, and S. Ariffin, “A review on recycling aluminum chips by hot extrusion process,” in Proceedings of the 12th Global Conference on Sustainable Manufacturing, GCSM 2014, pp. 761–766, mys, September 2014.