Download fulltext HTML
Aleksandrovich Okulov, R., Ivanovich Sarsadskikh, K., Anatolievich Ilinykh, S., & Nikolayevich Zakharov, M. (2020). The Influence of the Direction of the Channels of the Gas Swirlers on the Properties of the Flow of the Plasma Jet under Implementation Theoretical Basis and Technical Solutions for Recycling Technogenic Waste. KnE Materials Science, 6(1), 84–89. https://doi.org/10.18502/kms.v6i1.8048

https://doi.org/10.18502/kms.v6i1.8048

statistics

  • 372 Abstract Views
  • 260 PDF Views
  • 0 HTML Views

authors

  • Roman Aleksandrovich Okulov

    Roman Aleksandrovich Okulov

    Institute of Metallurgy of the Ural Branch of the Russian Academy of Sciences, Ekaterinburg, 620016, Russia
  • Konstantin Ivanovich Sarsadskikh

    Konstantin Ivanovich Sarsadskikh

    Institute of Metallurgy of the Ural Branch of the Russian Academy of Sciences, Ekaterinburg, 620016, Russia
  • Sergey Anatolievich Ilinykh

    Sergey Anatolievich Ilinykh

    Institute of Metallurgy of the Ural Branch of the Russian Academy of Sciences, Ekaterinburg, 620016, Russia
  • Mikhail Nikolayevich Zakharov

    Mikhail Nikolayevich Zakharov

    Institute of Metallurgy of the Ural Branch of the Russian Academy of Sciences, Ekaterinburg, 620016, Russia

Published Date

  • Dec 31, 2020

The Influence of the Direction of the Channels of the Gas Swirlers on the Properties of the Flow of the Plasma Jet under Implementation Theoretical Basis and Technical Solutions for Recycling Technogenic Waste

KnE Materials Science / IV Congress “Fundamental Research and Applied Developing of Recycling and Utilization Processes of Technogenic Formations” Volume 2020 / Pages 84–89

Abstract

A variant of the use of plasmatrons for the disposal of industrial waste and the organization of non-waste production is proposed in this article, which presents the design for the functioning equipment. A computer experiment was carried out to determine the parameters of the flow of the plasma jet. The results of a computer experiment are confirmed by a full-scale experiment. Conclusions and results are of practical benefit to developers and consumers of technological equipment.


Keywords: plasmatron, flow, plasma, jet, temperature, velocity

References
[1] Klimenko, A. A. and Lyapin, G. K. (2010). Constructions of Electric Arc Plasma Torches. Moscow: Publishing House of Moscow State Technical University, p. 56.

[2] Anakhov, S. V., Pykin, Y. A. and Matushkin, A. V. (2016). Welding International, issue 30, pp. 408-412.

[3] Matushkin, A. V. (2017). Improving the Gas-vortex Stabilization System of Electric Arc Plasmatrons for Metal Cutting. (PhD dissertation, Ural Federal University named after the first President of Russia B.N. Yeltsin, 2017).