Structure and Properties of Porous Alloys Based on NiTi Doped by Al, Fabricated by SHS-method
Abstract
The effect of aluminum doping of porous TiNi-based alloy on structure, penetrability, strength properties and characteristic temperature intervals of martensitic transformations, multiple shape memory effect (MSME) parameters were studied. In this paper porous alloys from mixture of titanium, nickel and aluminum (CAl=0-2.0 at. %) powders were obtained by self propagation high temperature synthesis (SHS-method). Aluminum additives allow to obtain a material which is characterized by an increased content of fine pores 10-20 mm, uniform pore size distribution, an increased level of strength. The optimum concentration of Al to obtain high properties of material was defined. The porous TiNi-based alloys doped with aluminum are promising to solve a number of complex medical problems, such as in vascular surgery and cellular technologies.
References
[1] Gunther, V.E.; Hodorenko, V.N.; Chekalkin, T.L. et al. Medical materials and shape memory implants: In 14 vol. / Shape memory medical materials, Tomsk: MIC [In Russian], 2011, 1.
[2] Monogenov, A.N., Khodorenko, V.N. & Gyunter, V.E. Tech. Phys. Lett. (2014) 40: 824. doi:10.1134/S1063785014090259.
[3] Ovcharenko, V.V., Monogenov, A.N., Yasenchuk, Y.F. et al. Tech. Phys. Lett. (2006) 32: 288. doi:10.1134/S1063785006040043
[4] Gyunter, V.É., Khodorenko, V.N., Monogenov, A.N. et al. Tech. Phys. Lett. (2000) 26: 320. doi:10.1134/1.1262830
[5] Itin and Yu. S. Naiborodenko, High-Temperature Synthesis of Intermetallic Compounds [In Russian] (Tomsk. Gos. Univ., Tomsk, 1989).Google Scholar
[6] Khodorenko, V.N., Gyunter, V.É., Monogenov, A.N. et al. Tech. Phys. Lett. (2001) 27: 970. doi:10.1134/1.1424409