Download fulltext HTML
Ding, J., Wu, Z., Li, H., Cai, Z., Wang, X., & Guo, X. (2016). Characteristics and Sensing Properties of the La1-xNdxCo0.3Fe0.7O3 System for CO Gas Sensors. KnE Materials Science, 1(1), 36-40. https://doi.org/10.18502/kms.v1i1.559

https://doi.org/10.18502/kms.v1i1.559

statistics

  • 317 Abstract Views
  • 129 PDF Views
  • 0 HTML Views

authors

  • J.C. Ding
    No author data available.
  • Z.P. Wu
    No author data available.
  • H.Y. Li
    No author data available.
  • Z.X. Cai
    No author data available.
  • X.X. Wang
    No author data available.
  • X. Guo
    No author data available.

Published Date

  • Oct 12, 2016

Characteristics and Sensing Properties of the La1-xNdxCo0.3Fe0.7O3 System for CO Gas Sensors

KnE Materials Science / IV Sino-Russian ASRTU Symposium on Advanced Materials and Processing Technology (ASRTU) / Pages 36-40

Abstract

A series of nanostructured La1-xNdxCo0.3Fe0.7O3 perovskite-type (x ranging from 0 to 1) were prepared using the co-precipitation method. CO gas sensing properties of La1-xNdxCo0.3Fe0.7O3 sensors were performed. La0.7Nd0.3Co0.3Fe0.7O3 sensor showed the highest response at 250 °C (S=52.8).

References
[1] A. V. Salker, N.-J. Choi, J.-H. Kwak, B.-S. Joo, and D.-D. Lee, Thick films of In, Bi and Pd metal oxides impregnated in LaCoO 3 perovskite as carbon monoxide sensor, Sensors and Actuators, B: Chemical, 106, no. 1, 461–467, (2005).


[2] T. Zhang, L. Liu, Q. Qi, S. Li, and G. Lu, Development of microstructure In/Pd-doped SnO2 sensor for low-level CO detection, Sensors and Actuators, B: Chemical, 139, no. 2, 287–291, (2009).


[3] H. J. Jung, J.-T. Lim, S. H. Lee, Y.-R. Kim, and J.-G. Choi, Kinetics and mechanisms of CO oxidation on Nd1-xSrxCoO3-y catalysts with static and flow methods, Journal of Physical Chemistry, 100, no. 24, 10243–10248, (1996).


[4] DH. Kim and Kim. , KH: Kinetics and oxygen vacancy mechanism of the oxidation of carbon-monoxide on perovskite Nd1-xSrxCoO3-y solutions as a catalysis. Bull Kor Chem Soc, in Kim KH: Kinetics and oxygen vacancy mechanism of the oxidation of carbon-monoxide on perovskite Nd1￿xSrxCoO3￿y solutions as a catalysis. Bull Kor Chem Soc, 15, 616–622, 616-622, 15, 1994.


[5] L. Malavasi, C. Tealdi, G. Flor, G. Chiodelli, V. Cervetto, A. Montenero, and M. Borella, NdCoO3 perovskite as possible candidate for CO-sensors: Thin films synthesis and sensing properties, Sensors and Actuators, B: Chemical, 105, no. 2, 407–411, (2005).


[6] R. Zhang, J. Hu, Z. Han, M. Zhao, Z. Wu, Y. Zhang, and H. Qin, Electrical and CO-sensing properties of NdFe1-xCo xO3 perovskite system, Journal of Rare Earths, 28, no. 4, 591–595, (2010).


[7] N. T. Thuy, D. L. Minh, H. T. Giang, and N. N. Toan, Structural, electrical, and ethanol-sensing properties of La1-xNdxFeO3 nanoparticles, Advances in Materials Science and Engineering, 2014, Article ID 685715, (2014).