Download fulltext HTML
Chernomas, V., Khimukhin, S., & Khimukhina, T. (2016). Combined Process For Producing Continuously Cast And Deformed Billets From Technical Copper. KnE Materials Science, 1(1), 31-35. https://doi.org/10.18502/kms.v1i1.558

https://doi.org/10.18502/kms.v1i1.558

statistics

  • 223 Abstract Views
  • 103 PDF Views
  • 0 HTML Views

authors

  • V.V. Chernomas
    No author data available.
  • S.N. Khimukhin
    No author data available.
  • T.S. Khimukhina
    No author data available.

Published Date

  • Oct 12, 2016

Combined Process For Producing Continuously Cast And Deformed Billets From Technical Copper

KnE Materials Science / IV Sino-Russian ASRTU Symposium on Advanced Materials and Processing Technology (ASRTU) / Pages 31-35

Abstract

A foundry-forging module allowing one to obtain a deformed profile of a specified cross section from molten metal in a continuous mode is developed and fabricated. The data of metallography investigations of continuously cast deformed blanks (CCDB) from technical copper and their comparison with structures of cast test samples are given. The results of estimation of the dimensional geometric accuracy of the CCDB samples are presented.

References
[1] BL. Odinokov Proskuryakov and Chernomas. , VV: Theoretical and experimental investigation of a continuous process of crystallization of metal with its simultaneous deformation, Nauka, Moscow, 2006.