Download fulltext HTML
Uryadova, A. L., Vodolazskiy, F. V., Illarionova, S. M., Kosmatskiy, Y. I., Gornostaeva, E. A., Barannikova, N. A., & Illarionov, A. G. (2019). Structure and Properties of the Billet of PT-1M Alloy after Expanding. KnE Engineering, 4(1), 253–260. https://doi.org/10.18502/keg.v1i1.4417

https://doi.org/10.18502/keg.v1i1.4417

statistics

  • 312 Abstract Views
  • 183 PDF Views
  • 0 HTML Views

authors

  • A. L. Uryadova
    No author data available.
  • F. V. Vodolazskiy
    No author data available.
  • S. M. Illarionova
    No author data available.
  • Ya. I. Kosmatskiy
    No author data available.
  • E. A. Gornostaeva
    No author data available.
  • N. A. Barannikova
    No author data available.
  • A. G. Illarionov
    No author data available.

Published Date

  • Apr 15, 2019

Structure and Properties of the Billet of PT-1M Alloy after Expanding

KnE Engineering / XIX International scientific-technical conference “The Ural school-seminar of metal scientists-young researchers” / Pages 253–260

Abstract

In this paper the macro-, microstructure, the hardness and the modulus of elasticity for the billet of the PT-1M alloy after expanding was studied. It was shown the expanding resulted to grain refinement near inner surface of the billet due to the recrystallization. The relationship between the structure through sections, the hardness and the modulus of elasticity was established.


 


 


Keywords: titanium alloy PT-1M, expanding, macrostructure, microstructure, hardness, modulus of elasticity

References
[1] B.V. Barichko, Ya.I. Kosmatsky, K.Yu. Panov. Technology of pressing processes Chelyabinsk. SUSU Publishing Center, 2011. 70 p.


[2] A.A. Ilyin, B.A. Kolachev, I.S. Polkin. Titanium Alloys. Composition, Structure, Properties. Reference book. Moscow, VILS-MATI, 2009. 520 p.


[3] Kosmatskiy Ya.I., Fokin N.V., Filyaeva E.A., Barichko B.V. Study on the Deformation Ability Billets of Titanium Alloy Grade PT-1M. Bulletin of the South Ural State University. Ser. Metallurgy, 2017, V. 17, №. 4, pp. 83-91.


[4] S.G. Glazunov, B.A. Kolachev, Titanium alloys. Metallography of titanium alloys, M.: Metallurgy, 1980. 464 p.


[5] W.C. Oliver, G.M.Pharr An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. // Journal Materials Research. 1992. V.7. №6. P.1564-1583.


[6] S.G. Glazunov, V.N. Moiseev, Structural titanium alloys. M.: Metallurgy. 1974. 368 p.


[7] L.A. Nikolsky, Hot stamping and pressing of titanium alloys, M.: Mashinostroenie, 1975, 285 p.


[8] Popov AA, Metallurgy and heat treatment of titanium alloys. Structure and properties / A.G. Illarionov, N.G. Rossina, S.V. Grib. Ekaterinburg: UrFU, 2012. 268 p.


[9] Degtyarev, M.V., Chashchukhina, T.I., Voronova, L.M., Patselov, A.M., Pilyugin, V.P.Influence of the relaxation processes on the structure formation in pure metals and alloys under high-pressure torsion // Acta Materialia, 2007, 55 (18), P. 6039-6050.


[10] U. Zwicker Titan and its alloys, M.: Mir. 1979. 512 p.


[11] Kolachev B.A., Elagin V.I., Livanov V.A. Metal Science and Heat Treatment of NonFerrous Metals and Alloys. Moscow: MISIS Publ., 2001, 416 p.