Download fulltext HTML
Loginov, Y., Stepanov, S., Golodnov, A., & Mukanov, G. (2019). Analysis of Bending Test Technique for Osteosynthesis Titanium Plate. KnE Engineering, 4(1), 106–112. https://doi.org/10.18502/keg.v1i1.4397

https://doi.org/10.18502/keg.v1i1.4397

statistics

  • 1172 Abstract Views
  • 468 PDF Views
  • 0 HTML Views

authors

  • Y.N. Loginov
    No author data available.
  • S.I. Stepanov
    No author data available.
  • A.I. Golodnov
    No author data available.
  • G.Z. Mukanov
    No author data available.

Published Date

  • Apr 15, 2019

Analysis of Bending Test Technique for Osteosynthesis Titanium Plate

KnE Engineering / XIX International scientific-technical conference “The Ural school-seminar of metal scientists-young researchers” / Pages 106–112

Abstract

Abstract Titanium and its alloys often take the role of material for manufacturing the implants for orthopedic use. The purpose of the study is to determine the parameters of bending test of an implantable titanium plate used for osteosynthesis. The method described in the ISO 9585-2011 was analyzed for testing metal plates for fixation of fractured bone fragments. A comparison of the test results for plates on a 4-point bending for two different standards and the results of experiments are reported. The attention is drawn to the possibility of weakening of titanium plates with fixation holes.


 


 


Keywords: 4-point bending test, plate for osteosynthesis, titanium implant, mechanical properties

References
[1] V. Tuovinen, R. Suuronen, M. Teittinen, P. Nurmenniemi. Comparison of the stability of bioabsorbable and titanium osteosynthesis materials for rigid internal fixation in
orthognathic surgery. A prospective randomized controlled study in 101 patients with 192 osteotomies, International Journal of Oral and Maxillofacial Surgery. (2010) 1059- 1065


[2] Yu.N. Loginov, A.I. Golodnov, S.I. Stepanov, E.Yu. Kovalev, Determining the Young’s modulus of a cellular titanium implant by FEM simulation, AIP Conference Proceedings. 1915, (2017) 030010.


[3] N. Theologie-Lygidakis, I. Iatrou, G. Eliades, S. Papanikolaou, A retrieval study on morphological and chemical changes of titanium osteosynthesis plates and adjacent tissues, Journal of Cranio-Maxillofacial Surgery. 35 (2007) 168-176.


[4] E.M. Ortrun Pohler, Unalloyed titanium for implants in bone surgery, Injury. 31 (2000) 7-13.


[5] W.J. Metsemakers, T. Schmid, S.Zeiter, M. Ernst, I. Keller, N. Cosmelli, D. Arens, T. Fintan Moriarty, R. Richards Geoff, Titanium and steel fracture fixation plates with different surface topographies: Influence on infection rate in a rabbit fracture model, Injury. 47 (2016) 633-639.


[6] C.R.F. Azevedo, Failure analysis of a commercially pure titanium plate for osteosynthesis, Engineering Failure Analysis. 10 (2000) 153-164.


[7] Y. Okazaki, E. Gotoh, Comparison of fatigue strengths of biocompatible Ti-15Zr-4Nb4Ta alloy and other titanium materials, Materials Science and Engineering. 31 (2011) 325-333.


[8] Implants for surgery. Determination of bending strength and stiffness of bone plates (ISO 9585), International Organization for Standardization (1990).


[9] Plastics. Methods for determining the modulus of elasticity in tension, compression and bending. Interstate standard GOST 9550-81, IPK Publishing house of standards (1981).


[10] D.M. Cesarone, J.A. Disegi, Techniques in the Application of ISO 9585 Test Method for Determination of Bone Plate Bending Properties, Clinical and Laboratory Performance Bone Plates, Philadelphia, ASTM, 1994.