Download fulltext HTML
Mileshin, S. A., Tsivinskaya, T. A., & Sergeeva, N. A. (2018). Microelectromechanical Sensors and Microstructures in Aerospace Applications. KnE Engineering, 3(6), 336–343. https://doi.org/10.18502/keg.v3i6.3012

https://doi.org/10.18502/keg.v3i6.3012

statistics

  • 815 Abstract Views
  • 191 PDF Views
  • 0 HTML Views

authors

  • S A Mileshin
    No author data available.
  • T A Tsivinskaya
    No author data available.
  • N A Sergeeva
    No author data available.

Published Date

  • Oct 8, 2018

Microelectromechanical Sensors and Microstructures in Aerospace Applications

KnE Engineering / Breakthrough directions of scientific research at MEPhI: Development prospects within the Strategic Academic Units / Pages 336–343

Abstract

The solutions in the sphere of MEMS technologies in space are overviewed in this article. The main emphasis is on micro-thrusters, which have the potential to enable missions that require micro-propulsive maneuvers for formation flying and precision pointing of micro-, nano-, or pico-sized satellites. The possible use of MEMS sensors and technologies of production are shown.

References
[1] Implications of Emerging Micro- and Nanotechnologies Committee on Implications of Emerging Micro- and Nanotechnologies. Air Force Science and Technology Board Division on Engineering and Physical Sciences, 2002.


[2] McComas, D. J., et al. (2003). Space applications of microelectromechanical systems: Southwest Research Institute1 vacuum microprobe facility and initial vacuum test results. Review of Scientific Instruments, vol. 74, no. 8, pp. 3874–3878.


[3] Yao, J. J., et al. (2001). Microelectromechanical system radio frequency switches in a picosatellite mission. Smart Materials and Structures, vol. 10, no. 6, pp. 1196–1203.


[4] Micro Thrusters built by TRW Team targets future microsatellites. Small Times “Business Wire,” May 16, 2001.


[5] Twiggs, R. (2000). Space system developments at Stanford University – From launch experience of microsatellites to the proposed future use of picosatellites. Proceedings of SPIE, vol. 4136, pp. 79–86.


[6] Kitts, C. A. and Twiggs, R. J. (1995). Initial developments in the Stanford SQUIRT program. Proceedings of SPIE, vol. 2317, pp. 178–185.


[7] Kitts, C., et al. (1999). Emerald: A low-cost spacecraft mission for validating formation flying technologies. Proceedings of the 1999 IEEE Aerospace Conference, Mar 6–13, 1999, vol. 2, p. 217226.


[8] Sekler, J., et al. (2003). COPS – A novel pressure gauge using MEMS devices for space, pp. 439–443. European Space Agency, (Special Publication) ESA SP.


[9] Sekler, J. and Wobmann, L. (2003). Development of an European QCM – Outgassing detector withminiaturised interfaces. European Space Agency, (Special Publication) ESA SP, pp. 515–519.


[10] Lafontan, X., et al. (2003). The advent of MEMS in space. Microelectronics Reliability, vol. 43, no. 7, pp. 1061–1083.


[11] Hampton, P., et al. (2003). Adaptive optics control system development. Proceedings of SPIE, vol. 5169, pp. 321–330.


[12] Andreev, K. A., Vlasov, A. I., and Shakhnov, V. A. (2016). Silicon pressure transmitters with overload protection. Automation and Remote Control, Т. 77, no. 7, С. 1281–1285.


[13] Vlasov, A. and Yudin, A. (2011). Distributed control system in mobile robot application: General approach, realization and usage. Communications in Computer and Information Science, T. 156 CCIS, pp. 180–192.


[14] Yudin, A., Kolesnikov, M., Vlasov, A., et al. (2017). Project oriented approach in educational robotics: from robotic competition to practical appliance. Advances in Intelligent Systems and Computing, Т. 457, С. 83–94.


[15] Sergeeva, N. A., Tsivinsky, T. A., and Shakhnov, V. A. (2016). Control and measuring MEMS with use of small-sized sensitive elements from single-crystal silicon for space branch. Sensors and Systems, no. 3, pp. 32–39.