Download fulltext HTML
Zelepukin, A., Pykhteeva, K., Zagainov, S., & Tleugabulov, B. (2018). Mathematical Modeling of Determining the Composition of the Charge in the Cross Section of the Blast Furnace. KnE Engineering, 3(5), 228–233. https://doi.org/10.18502/keg.v3i5.2674

https://doi.org/10.18502/keg.v3i5.2674

statistics

  • 351 Abstract Views
  • 177 PDF Views
  • 0 HTML Views

authors

  • A Zelepukin
    No author data available.
  • K Pykhteeva
    No author data available.
  • S Zagainov
    No author data available.
  • B Tleugabulov
    No author data available.

Published Date

  • Jul 17, 2018

Mathematical Modeling of Determining the Composition of the Charge in the Cross Section of the Blast Furnace

KnE Engineering / VII All-Russian Scientific and Practical Conference of Students, Graduate Students and Young Scientists (TIM'2018) / Pages 228–233

Abstract

When working on a multi-component charge, BLT cannot ensure the uniformity of the charge composition in the horizontal section of the blast furnace. In this case, there is a need to develop mathematical models and expiration portions forming material from the hopper to the subsequent creation of BLT software. With reference to the operating conditions of the blast furnaces of JSC ‘EVRAZ NTMK’, mathematical models
were developed for the formation of materials in the silo hopper by the consecutive unloading of two skips; in the order of emptying the hopper; on the distribution of charge on top throat of the blast furnace. On the basis of combining the developed mathematical models, computer software was created to form portions of charge
components, both in the BLT hopper and on the top throat. Created software product for calculating the formation of portions and the expiration of materials from the receiving hopper of the BLT allows you to quickly select the necessary load and optimize the process as a whole.



Keywords: blast furnace, burden, charging, bell-less top (BLT), sinter, pellets

References
[1] Bolshakov, V. I. (2010). Evaluating the efficiency of using bell-less charging apparatuses on blast furnaces. Metallurgist, vol. 54, pp. 153–157.


[2] Bolshakov, V. I., Muraviova, I. G., Semenov, Yu. S., et al. (2010). Study of the movement of charge materials in the shaft of a blast furnace, Metallurgist.


[3] Pykhteeva, K. B., Zagainov, S. A., Filippov, V. V., et al. (2009). Stabilizing the composition of blast-furnace products from titanomagnetites with a nonconical loading trough. Steel in Translation, vol. 39, pp. 45–49.


[4] Michinori, H., Iino, B., Shimomura, A., et al. (1993). Development of burden distribution simulation model for bell-less top in a large blast furnace and its application. ISIJ International, vol. 10, pp. 1070–1077.


[5] Teng, Z., Cheng, S., Du, P., et al. (2013). Mathematical model of burden distribution for the bell-less top of a blast furnace. International Journal of Minerals, Metallurgy, and Materials, vol. 20, pp. 620–626.


[6] Huatao, Z., Minghua, Z., Ping, D., et al. (2012). Uneven distribution of burden materials at blast furnace top in bell-less top with parallel bunkers. ISIJ International, vol. 52, pp. 2177–2185.


[7] Kushnarev, A. V., Filippov, V. V., Mikhalev, V. A., et al. (2017). System improvement of vanadium hot metal process at EVRAZ NTMK. CIS Iron and Steel Review, vol. 13, pp. 13–17.


[8] Jimoh, S. O., Pyhteeva, C. B., Zagaynov, S. A. (2013). Аnalysis of the characteristics of the blast Furnace peripheral zone. International Journal of Scientific & Technology Research, vol. 2, pp. 125–128.