Download fulltext HTML
Lugovik, A., Kudelin, S., Inatovich, Y., & Bondin, A. (2018). Optimization of Technologies of Section Rolling By the Conditions of Saving Energy Resources using the Expert System. KnE Engineering, 3(5), 220–227. https://doi.org/10.18502/keg.v3i5.2673

https://doi.org/10.18502/keg.v3i5.2673

statistics

  • 292 Abstract Views
  • 177 PDF Views
  • 0 HTML Views

authors

  • A Lugovik
    No author data available.
  • S Kudelin
    No author data available.
  • Y Inatovich
    No author data available.
  • A Bondin
    No author data available.

Published Date

  • Jul 17, 2018

Optimization of Technologies of Section Rolling By the Conditions of Saving Energy Resources using the Expert System

KnE Engineering / VII All-Russian Scientific and Practical Conference of Students, Graduate Students and Young Scientists (TIM'2018) / Pages 220–227

Abstract

Sort-rolled production is a complex, multi-faceted process characterized by high fuel and electricity costs. Therefore, increasing the efficiency of production and minimizing energy costs is one of the key tasks. The use of expert systems (ES), developed on the basis of modern information technologies of artificial intelligence elements and created on the basis of modern concepts of the mechanics of a deformable body of multiple mathematical models for roll pass design and technologies of rolling, provides the quick solution of this problem.


Keywords: expert system, rolling manufacture, hot section rolling, optimum rollingmill practice, costs for fuel and electricity, solution of technological tasks

References
[1] Tahautdinov, R. S., Fedonin, O. V., Pugachev, V. G., et al. (2008). World rolled steel market and prospects of development of section products in Russia. Manufacture of Rolled Products, no. 5, pp. 22–27.


[2] Radyukevich, L. V. (2011). State and main directions of development of production of rolled steel of Russian ferrous metallurgy in 2007-2010, Steel, no. 1, pp. 42–47.


[3] Wentzel, E. S. (1980). Operations Research: Tasks, Principles, Methodology, p. 208. Moscow: Science.


[4] Wagner. (1969). Harvey Principles of Operations Research with Applications to Managerial Decisions, p. 1084. Englewood Cliffs, New Jersey: Prentice-Hall, Inc.


[5] Gemitum, V. I. and Kagan, B. M. (1980). Methods of Optimal Design, p. 159. Moscow: Energy.


[6] Skorokhodov, A. N., Polukhin, P. I., Ilukevich, B. M., et al. (1983). Optimization of Rolling Production, p. 432. Moscow: Metallurgy.


[7] Kudelin, S. P., Smirnov, V. K., Shilov, V. A., et al. (25 May 2001). Program “Expert system of section rolling technology.” Certificate of state registration of the computer program, No. 2001610602 (RU), registered in the register of computer programs.


[8] Shilov, V. A., Kudelin, S. P., Ignatovich Y. V., et al. (2015). Expert System of Section Rolling Technology, Izvestiya. Ferrous Metallurgy, no. 9, pp. 710–715.


[9] Smirnov, V. K., Shilov, V. A., and Inatovich, Yu. V. (2010). Roll Pass Design, p. 490. Moscow: Teplotekhnik.


[10] Khokhlov, S. A., Limankin, V. V., Perunov, G. P., et al. (2010). Implementation of optimal technologies of rolling sections on the mill 320/150. OJSC AMURMETAL, Steel, no. 12, pp. 38–40.


[11] Perunov, G. P., Limankin, V. V., and Volkov K. V. (2006). The development of the technology of rolling-separation of reinforcing steel in small-sort-wire mill 320/150. OJSC Amurmetal, Manufacture of Rolling, no. 10, pp. 16–19.